Home/HighLevel/Features/Email/HighLevel guide to diagnosing and resolving mail loops

Conversations and Inbox

HighLevel guide to diagnosing and resolving mail loops

In short

A mail loop occurs when email is routed in a circle between servers, causing repeated delivery attempts and bounce rejections. HighLevel provides the tools to locate the loop, adjust forwarding rules, clean MX records, and reset cached routing so email can flow normally again.

AreaEmail · Technical & Configuration
Used forSaaS startup, Ecommerce store, Consulting agency
Setup steps22 steps in 5 tasks
Last updatedNovember 17, 2026

01Who this is for

  • Founders running SaaS platforms need to stop looping emails that can hurt their sender reputation.
  • Marketing teams managing large campaign lists benefit from clear diagnostics to keep deliverability high.
  • IT administrators managing multiple domains rely on DNS and forwarding checks to maintain proper mail flow.

02Mail loops, explained

HighLevel gives access to the settings needed to investigate mail loops. You can view domain warnings, authentication status, MX records and workflow configurations, then correct any circular routing that triggers bounce messages such as “caught in a routing loop between mail servers.” All actions are performed inside the HighLevel interface or with external lookup tools referenced in the guide.

03How businesses use mail loops

  • SaaS startup. The team opens Settings > Email Services > Dedicated Domains and IP, checks for warnings, reviews recent forwarding rule changes, pauses active campaigns, cleans MX entries, and re adds the domain to reset routing before sending test emails.
  • Ecommerce store. The owner runs an MX record test on MXToolbox.com, removes duplicate MX records in the DNS manager, updates priority numbers, waits 24 to 48 hours for propagation, and validates delivery with a test email from Marketing > Emails > Send Test Email.
  • Consulting agency. The agency audits automation workflows in Automation > Workflows, disables any that trigger each other, turns off auto responders that reply to automated messages, and monitors bounce reports for loop messages to confirm resolution.

04The numbers and rules that matter

  • Recommended bounce rate for healthy delivery: Below 2%.
  • Typical DNS propagation time after MX changes: 24, 48 hours.
  • Delivery time should be under 5 minutes for most providers.

05How to set up and use mail loops in HighLevel

Diagnose mail loop

  1. Open Settings > Email Services > Dedicated Domains and IP.
  2. Look for warning icons or incomplete setup and verify authentication status.
  3. Review recent changes to forwarding rules, workflows, and conversation integration.
  4. Navigate to Marketing > Emails > Reports and examine bounce messages for loop indicators.
  5. Identify which domains or addresses are affected by the bounce patterns.
  6. Pause any active campaigns to prevent further loop traffic.

Analyze DNS and headers

  1. Run a full MX record test for the domain using MXToolbox.com.
  2. Confirm global DNS propagation with DNSChecker.org or WhatsmyDNS.net.
  3. Copy the complete headers from a bounced email and locate all "Received:" lines.
  4. Analyze the headers with MXToolbox Email Header Analyzer or Google Admin Toolbox to find repeated servers.

Remove forwarding loops

  1. Log into your domain registrar or hosting panel.
  2. Review every email forwarding rule and alias for circular references.
  3. Delete any forwarding that points back to the original address or creates a loop.
  4. Disable catch all settings and auto responders that reply to automated messages.

Clean MX records

  1. Open your DNS manager and list all MX entries.
  2. Delete duplicate or conflicting MX records.
  3. Set priority numbers so lower values have higher priority, ensuring correct order.
  4. Verify each MX record points to a valid mail server and save changes.

Reset domain caching

  1. Go to Settings > Email Services > Sending Domains.
  2. Remove the problematic domain from the list.
  3. Add the same domain again, entering the required DNS records.
  4. Wait 24 to 48 hours for propagation and then test with a small email send.

06Settings that matter

  • Dedicated Domains and IP. Shows the domains linked to your account and any warning or incomplete setup status.
  • Authentication. Controls SPF and DMARC records for a domain, ensuring proper mail server verification.
  • Sending Domains. Lists domains that can be removed and re added to clear cached routing information.

07Things to know before you rely on it

  • DNS changes may need 24 to 48 hours to propagate before email flow returns to normal.
  • Mail loops can quickly affect sender reputation if not stopped promptly.

08If something goes wrong

  • Mail loop persists after removing forwarding rules.. Double check for hidden catch all or auto responder settings and verify MX records again.
  • DNS changes appear ineffective.. Allow a full 24 to 48 hour propagation period before testing delivery.

09How it connects to the rest of HighLevel

Michael's take

Michael Reimer
Michael ReimerFounder of CRM Pros, HighLevel Commander and Certified Admin

Mail loops feel like a small inconvenience that can quickly become a real shift in how you manage email deliverability. If the routing path keeps circling back on itself, you’ll see bounce messages that mention a loop and your sending reputation can take a hit.

Get More InformationOpens on HighLevelPublished November 2, 2026 · Updated November 17, 2026

Common questions

Common questions about mail loops.

How do I know if this is a mail loop versus a normal bounce?

Loop related bounces mention routing problems, "too many hops," or being "caught in a loop between mail servers," while normal bounces cite an invalid address or a full mailbox.

Can removing and re adding my domain cause data loss?

Removing and re adding a domain clears its cached routing and authentication status but does not delete campaigns, contacts, or historical data. DNS records must be reconfigured and re verified.

Will pausing my campaigns during resolution hurt my sender reputation?

Pausing campaigns is protective. Continuing to send into an active loop can cause far more reputation damage than a temporary pause.

How long should I wait after fixing DNS before resuming full volume?

Give DNS changes 24 to 48 hours to propagate, then validate with small test sends before scaling up.

Can a single misconfigured auto responder cause a mail loop?

Yes. An auto responder that replies to automated or bounce messages can trigger an infinite reply chain.

Should I contact my domain host or support first?

Start with your own diagnosis using the guide. If the issue stems from forwarding rules or DNS at your host, contact them; if it relates to workflows or platform configuration, reach out to support.

Next step

Pick the features that matter. Then get the plan that unlocks them.

Explore the features you want, start with the five at the top, and upgrade through my link when you are ready. The bonuses and the team come with it.

The features directory explains every HighLevel feature in plain English. Browse it to see what the platform can do.

Back to the FeaturesSee the full details
⌃

Site preview

Explore the next page

This destination is reserved in the page inventory and is not built yet.