Answers · Email
HighLevel Email questions. Answered in plain English.
Real questions people are asking about HighLevel email. Each answer is checked against HighLevel's own documentation before it is added here.
New HighLevel questions are answered here every week, in plain English and checked against HighLevel’s own documentation. Start with the newest ones.
Latest AnswersThe newest questions answered
The short answer
This page collects the email questions people ask most about HighLevel. Each one has a short answer, the details and the steps, all checked against HighLevel's documentation. New questions are added as they come up.
November 16, 2026
How does email verification work in HighLevel?
Verification protects your sending reputation. Mail sent to addresses that do not exist bounces, and a high bounce rate pushes your good mail toward spam. Checking first means bad addresses never get a send. HighLevel also flags known bad lists, high risk addresses and role addresses such as info@.
- Agency level: Settings, then Email Services, then Location Settings, and the Email Verification column. Turn it on per subaccount or in bulk, and optionally for every new subaccount.
- Subaccount level: Settings, then Business Profile, then General, and tick Verify Email.
- Recheck: an option checks addresses again every 90 days.
For more control, use the Email Verification workflow action. It marks each address and lets you branch. The action does not stop a workflow on its own. Your If/Else branch does that, so place the action before any Send Email step and send risky or invalid contacts down a separate path, such as a tag, DND or an exit.
Know what it cannot do. It does not reliably detect catch all domains, and a verified address is not a promise of inbox delivery. The common mistakes HighLevel names are placing the action after the email step, forgetting to turn verification on for the subaccount, and treating verified as delivered. Verification is billed per check. See HighLevel email pricing before you turn it on everywhere.
Verification is one part of deliverability. Pair it with fix email deliverability problems and clean up your contact data, and if mail already bounces, see fix email bounces and blocks.
What to do
- Turn on verification for the subaccount: Settings, Business Profile, General, then tick Verify Email.
- In the workflow, add the Email Verification action before the first Send Email step.
- Add an If/Else after it that checks whether the email is verified.
- Send valid contacts to the email steps and route risky or invalid ones to a tag, DND or an exit.
Checked against HighLevel help center articles Workflow Action Email Verification and How to Enable and Rebill LC Email Verification on November 16, 2026. Asked in a public forum.
November 15, 2026
Is HighLevel email warm up limited to one domain, and which plans include it?
Warm up lives on the domain card. Agency and subaccount dedicated domains both qualify, so an agency can warm its own domain and each client's domain separately. Domains you added before you got access do not start on their own. You turn warm up on for each one.
Behind the scenes, HighLevel creates dedicated warm up mailboxes on your domain. They send to each other, reply in threads, mark messages as important and pull warm up emails out of spam, while daily volume climbs toward the goal you pick. The goal is a ceiling, not a promise. In HighLevel's own example, a goal of 25,000 a day uses five mailboxes capped at 5,000 each.
The common mistake is treating warm up as a fix for a bad list. It builds reputation slowly, but bounces and complaints from your real sends still count against the domain. Authenticate the domain first, then send to your most engaged contacts while warm up runs. See how to warm up a sending domain, fix domain warm up problems and email authentication with SPF, DKIM and DMARC.
What to do
- Request access to the Email Warm Up beta through HighLevel's beta request form.
- In the agency or the subaccount, go to Settings, Email Services, SMTP Service, then the Dedicated Domain and IP tab.
- Check that the domain is verified and its SSL certificate is issued.
- On the domain card, under Domain Warm Up, click Start warm up.
- Under Daily goal, click Change, pick a daily warm up limit and click Done.
- Review the warm up mailboxes HighLevel created, then click Start warm up. The badge changes to Warming up.
Checked against Email Domain Warm Up: Automated Email Warm Up (HighLevel help center, updated October 27, 2026) on November 15, 2026. Asked in a community post.
November 12, 2026
How do I remove or change the unsubscribe link in HighLevel emails?
The default lives in Sub Account Settings, Business Profile, General, under Include Unsubscribe Link. When it is on, HighLevel adds the link to the footer of every email from that sub account. When it is off, every email must carry the unsubscribe tag. HighLevel points to CAN SPAM and GDPR as the reason, and warns that sending without a link can lead to your sending being suspended.
Most people turn the default off for design reasons. They want the link in their own footer, in their brand style. Put the tag in your template footer, or use the custom value called UNSUBSCRIBE LINK under Email, and save that footer in every template you use.
For a fully branded flow, publish an unsubscribe page, create a trigger link to it, and build a workflow on Trigger Link Clicked that sets Email DND for the contact. Publish the workflow before you use the link, or people will see the page but stay subscribed. You can also choose a one step, two step or dynamic unsubscribe flow under Marketing, Emails, Campaigns, Settings. If you want contacts to drop one kind of email and keep others, use email subscription types. See also contacts marked Do Not Disturb and emails going to spam.
What to do
- Decide on one method: the default footer link, the unsubscribe tag, or a custom branded link.
- To use the tag, add {{email.unsubscribe_link}} to the footer of every email template first.
- Then turn off Include Unsubscribe Link under Settings, Business Profile, General.
- For a custom link, publish an unsubscribe page, create a trigger link, and publish a workflow that sets Email DND on click.
- Send yourself a test of each template and click the link to confirm it works.
Checked against Managing Default Unsubscribe Links in LC Email (HighLevel help center, updated November 5, 2026); Step by Step guide to Creating Custom Unsubscribe Links; Configuring Unsubscribe Flows (One Step, Two Step, Dynamic) on November 12, 2026. Asked in a public forum.
November 11, 2026
How do email subscription types work in HighLevel, and can a contact opt out of just one?
You create the types in Settings, then Preference Management Hub. Each type has a name of up to 100 characters and a description, and you can rename it later. You can have five active types at a time. To add a sixth, archive one first. New setups no longer start with a default type for one to one email, so you build the list yourself.
The link between a type and an email is made when you send. In the Email Builder, click Send or Schedule and pick a Preference Type. If a contact opted out of that type, HighLevel leaves them out even when they are in the audience. HighLevel's article says the same filtering applies to email sent from workflows.
Contacts can manage this themselves. When preferences are on, the unsubscribe link includes a Manage your preferences link, so a reader can drop one type and keep the rest. You can also change it for them on the contact record.
People often ask why a new contact shows as subscribed to every type. HighLevel's article does not describe a setting that starts new contacts unsubscribed from a type. If someone should not get a type, change their status on the contact or let them use the preferences link.
- Plan the types before you switch this on. HighLevel says Preference Management cannot be turned off once it is enabled.
- The type you pick at send time decides who is left out. Choose it on every campaign.
- To put someone back on a type after they opted out, HighLevel asks you to provide a legal basis first.
- Status changes are logged in Conversations, so you can see when a contact opted out.
Preferences handle consent, not inbox placement. For delivery, set up SPF, DKIM and DMARC and read how to fix emails going to spam.
What to do
- Go to Settings, then Preference Management Hub in the sub account.
- Click + Create Subscription Type, add a name and a description, and confirm with Save & Confirm.
- In the Email Builder, click Send or Schedule and choose the Preference Type for that campaign.
- To change one contact, open the contact, go to the DND tab, click Subscription Status and set each type to Subscribed or Unsubscribed.
Checked against HighLevel help center article Preference Management (Email Unsubscription Management) on November 11, 2026. Asked in a community post.
November 6, 2026
Can I send and receive email in HighLevel like a normal inbox?
HighLevel's help center calls this the Personal Inbox. It is set up per user, inside a sub account, from that user's profile.
| Question | What HighLevel's help center says |
|---|---|
| Which emails sync? | Emails you send to a contact from the CRM, and emails a saved contact sends to your connected address. |
| Do my old emails import? | No. Emails from before the connection cannot be synced. |
| Where do sent emails go? | Emails sent from the CRM are also logged in your Gmail Sent folder. |
| What about CC and BCC? | They show under the matching contact. No new contacts are created for them. |
| Do bulk and workflow emails use it? | No. Those send from the sub account's email service. |
As described in HighLevel's help center when this answer was checked.
Emails from contacts who are also users in the sub account are not synced. To pull in a conversation with someone who is not a contact yet, the Gmail article describes BCC to your HighLevel address, which creates the contact and the conversation.
What to do
- Open the sub account. From the agency, use Login As if you are not a user there.
- Go to Settings, then My Profile, and scroll to Email (2 way sync).
- Choose Gmail or Outlook, click Connect and accept the permissions.
- Go to Conversations, click the new message icon, choose Direct Message and pick a contact.
- Send a test email and check that the reply shows in the contact's conversation.
Checked against Getting Started: Connect Personal Inbox in HighLevel; How to Set Up Two Way Email Sync for Gmail (HighLevel help center) on November 6, 2026. Asked in video comments.
Questions
Quick answers.
How does email verification work in HighLevel?
GoHighLevel email verification checks an address before the first email goes to a contact. It looks at the format, the domain's mail records and whether the mailbox exists, without sending anything. Invalid addresses are not emailed. A workflow action marks addresses valid, risky or invalid.
Is HighLevel email warm up limited to one domain, and which plans include it?
GoHighLevel email warm up has no stated single domain limit: it is turned on per dedicated sending domain, and HighLevel sets no cap on how many domains you warm. It is in beta, so you request access, and it is free for approved beta users. HighLevel names no plan requirement, and pricing after the beta has not been announced.
How do I remove or change the unsubscribe link in HighLevel emails?
You can replace it, but not drop it. GoHighLevel requires an unsubscribe option in every LC Email message: either the default footer link or the {{email.unsubscribe_link}} tag. Turn the default off in Settings, Business Profile, then place the tag where you want it, or build a custom branded unsubscribe link with a trigger link and a workflow.
How do email subscription types work in HighLevel, and can a contact opt out of just one?
Yes. GoHighLevel handles this with Preference Management. Each sub account creates up to five subscription types, and each campaign is sent under one type. A contact who opts out of a type stops getting email sent under it. A global unsubscribe still stops all marketing email from that location.
Can I send and receive email in HighLevel like a normal inbox?
Partly. Connect Gmail or Outlook with two way email sync and you can send and reply from Conversations, with replies landing on the contact's record. It is not a full mailbox. HighLevel syncs email with people who are already contacts in the CRM, from the moment you connect. Older emails do not come across.
Does HighLevel email verification stop the workflow for invalid emails?
No. The action only marks the address. Add an If/Else branch after it to route invalid or risky contacts away from your email steps.
Does HighLevel email verification guarantee inbox delivery?
No. It confirms the address can receive mail. Inbox placement still depends on your domain setup, content and sending habits.
Does HighLevel email warm up cost extra?
HighLevel says it is free for approved beta users. Pricing after the beta has not been announced.
How long until HighLevel warm up results show?
HighLevel says results may take one or two days to appear after you start warm up.
Can I send HighLevel emails without an unsubscribe link?
No. HighLevel requires the default footer link or the unsubscribe tag in every LC Email message, and sending without one can lead to your sending being suspended.
Can I turn off Preference Management in HighLevel after enabling it?
No. HighLevel's help center says Preference Management cannot be turned off once it is enabled, so plan your subscription types first.
How many email subscription types can a HighLevel sub account have?
Up to five active types. Archive one to add another. Names can be up to 100 characters and can be edited later.
Next step
See it in your own account. Fourteen days, every feature.
Start a trial, build the first system and test it before the first invoice. Usage fees for phone, SMS, email and AI can apply during the trial.
HighLevel has three plans at a flat monthly price, each with unlimited users and contacts. See what each one includes and what it costs.
Compare the PlansStarter, Unlimited and Founder