Home/HighLevel/Troubleshooting/Snapshot not importing
Troubleshooting · Agency
Fix: GoHighLevel snapshot not importing. Link type, access or protection.
Snapshot imports fail when the share link is restricted to someone else, already used, or the importing user lacks Agency Admin access. Push history shows the rest.
The short answer
A GoHighLevel snapshot usually fails to import because the share link was a one time or email link that has already been used, or it is restricted to another agency or subaccount, the importing user lacks Agency Admin permissions, or asset protection limits what transfers, so ask the sender for a fresh link.
Michael is a sponsored HighLevel affiliate. Links to HighLevel use his partner link at no extra cost to you. HighLevel prices and product facts on this page come from HighLevel's own pricing page and help center, checked on the date above.
Causes
Why is a HighLevel snapshot not importing?
Most cases come down to the four causes in this table. Check each one before you change anything.
| Cause | How to check |
|---|---|
| Single use link already used | Ask the sender for a new link |
| Restricted link | Agency or subaccount restriction |
| Not an Agency Admin | Your user role |
| Asset protection | Protected assets in the snapshot |
Diagnose
How do you confirm which snapshot step failed before you ask for a new link?
Three different things get called importing. Sharing is the sender creating a link. Importing is you adding the snapshot to your agency snapshot library. Loading is applying it to a subaccount. Work out which one failed, since each has its own cause.
If the link itself will not accept, the cause is the link or your role. Check that you are logged in as an Agency Admin of the agency that should receive it. Then ask the sender which link type they created. A single use link stops working after the first import. An agency restricted or subaccount restricted link only works for the account it was made for.
If the snapshot is already in Account Snapshots but assets are missing in the subaccount, the import worked and the load is the issue. Check the snapshot push history for failures. Remember that Assets Protection is a choice the sender made about protected content, not a fault. After loading, fill in the custom values before any workflow sends. See fix custom values not populating.
Fix
Fix it step by step.
- Confirm you are an Agency Admin.
- Ask the sender which link type they created.
- Request a new link if it was single use or restricted.
- Import into your snapshot library, then load into a subaccount.
- Check snapshot push history for failures.
Still stuck
When to contact support.
If none of these fix it, open Help and Support from the question mark at the top right of your agency view, then start a chat (AI Support Chat or Agent Chat), join a Zoom call or open a ticket. Have your Agency Relationship Number and the Location ID of the subaccount ready, add screenshots of the problem, and turn on Support Access so the team can look inside the account. Only Agency Admins and Agency Users can reach HighLevel support; subaccount users go through their agency.
- Use the right link type when sharing
If you are an Agency Admin, the link is new and the import still fails, send support the snapshot name, the link type, the time you tried, the receiving agency and a screenshot of the error or the push history.
To prevent it, senders should choose the link type on purpose and include short instructions on importing and loading. Receivers should load into a spare subaccount first, since a snapshot cannot be unloaded once it is in a subaccount. See share a snapshot, create a snapshot and the snapshot glossary entry. New accounts are covered in set up your first subaccount.
For how snapshots work in general, read GoHighLevel snapshots explained. Still evaluating? Start with the 30 day GoHighLevel free trial through Michael's link and test this in your own account. What your account can do depends on the plan, so check GoHighLevel plans compared.

Sharing, importing and loading are three steps. Check which one failed.
Questions
Common questions.
Why is my snapshot not importing?
A snapshot usually fails to import because the share link was a one time or email link that has already been used, or it is restricted to another agency or subaccount, the importing user lacks Agency Admin permissions, or asset protection limits what transfers, so ask the sender for a fresh link.
How do I prevent it?
Senders should choose the link type on purpose and include short instructions on importing and loading. Receivers should load into a spare subaccount first, since a snapshot cannot be unloaded once it is in a subaccount. Use the right link type when sharing.
When should I contact HighLevel support?
Contact support once you have checked every cause on this page and it still fails, or when the fix sits on HighLevel's side. If you are an Agency Admin, the link is new and the import still fails, send support the snapshot name, the link type, the time you tried, the receiving agency and a screenshot of the error or the push history.
Why does my snapshot link not work a second time?
It was probably a single use link, which works for one import only. Ask the sender for a new link.
Who can import a snapshot in HighLevel?
An Agency Admin. The snapshot is imported into the agency snapshot library first, then loaded into a subaccount.
What is the difference between importing and loading a snapshot?
Importing adds the snapshot to your agency snapshot library. Loading applies it to a subaccount. Both steps are needed before the assets appear in an account.
Next step
See it in your own account. Thirty days, every feature.
Start a 30 day trial through Michael's link, build the first system and test it before the first invoice. Usage fees for phone, SMS, email and AI can apply during the trial.
HighLevel has three plans at a flat monthly price, each with unlimited users and contacts. See what each one includes and what it costs.
Compare the PlansStarter, Unlimited and Founder