Home/HighLevel/Troubleshooting/SMS not delivered

Troubleshooting · Texting

Fix: GoHighLevel SMS messages not delivered. Read the error code first.

A failed text shows an error code in the message details. That code tells you whether the problem is registration, content, the number or consent.

  • 5likely causes
  • 5fix steps
  • 1escalation path
SymptomCausesFixConfirm
5
Likely causes5 to check1 ruled out
Diagnosis
Texting · SymptomSMS not delivered
Issue
130034: not on an A2P campaignRuled out
230007: carrier filteringChecking
321211: invalid numberTo check
421610: opted outTo check
5DND on SMSTo check
5 fix stepsRead the error code first.Fix it, then confirm it works

The short answer

SMS messages in GoHighLevel usually fail because the number is not on an approved A2P campaign (error 30034), the message was filtered by the carrier (30007), the number is invalid (21211) or the contact opted out (21610), so open the failed message, read the code and fix that cause first.

Michael is a sponsored HighLevel affiliate. Links to HighLevel use his partner link at no extra cost to you. HighLevel prices and product facts on this page come from HighLevel's own pricing page and help center, checked on the date above.

Causes

Why are HighLevel SMS messages not delivered?

Most cases come down to the five causes in this table. Check each one before you change anything.

CauseHow to check
30034: not on an A2P campaignTrust Center campaign and linked numbers
30007: carrier filteringMessage content, links and consent
21211: invalid numberNumber format with country code
21610: opted outContact replied STOP
DND on SMSContact DND settings

Diagnose

How do you confirm why a text failed before you resend it?

Open the failed message in Conversations and write down the error code. Then look at how wide the problem is. One contact failing points to that contact: an invalid number, an opt out or DND. Every message from one number failing points to that number and its A2P link. Messages with a link failing while plain ones deliver points to content filtering.

Now check the place each code points to. For 30034, go to Settings, Phone System, Trust Center, read the status of the brand and campaign and confirm the sending number is linked to the approved campaign. For 21211, open the contact and look at the number format, including the country code. For 21610, read the thread for a STOP reply. For 30007, read the message as a carrier would: does it name the business, include opt out wording and avoid public link shorteners?

Test before you resend to a list. Send a plain text with no link to your own mobile. Then send the same text with your branded link. If the first delivers and the second does not, the link is the trigger.

Fix

Fix it step by step.

  1. Open the failed message and note the error code.
  2. For 30034, link the number to the approved campaign in the Trust Center.
  3. For 30007, identify the business, add opt out wording and replace public link shorteners.
  4. For 21211, correct the number with its country code.
  5. For 21610 or DND, do not message the contact again unless they opt back in.

Still stuck

When to contact support.

If none of these fix it, open Help and Support from the question mark at the top right of your agency view, then start a chat (AI Support Chat or Agent Chat), join a Zoom call or open a ticket. Have your Agency Relationship Number and the Location ID of the subaccount ready, add screenshots of the problem, and turn on Support Access so the team can look inside the account. Only Agency Admins and Agency Users can reach HighLevel support; subaccount users go through their agency.

  • Register A2P before any texting
  • Use branded links
  • Text only consenting contacts

If messages fail with an approved campaign, linked numbers and clean content, send support the sending number, the error code, the time, the exact message text and two or three example contacts.

For prevention, finish A2P registration before any texting and watch error and opt out rates after each campaign. If registration is the blocker, see A2P registration rejected. If complaints are rising, read 10DLC campaign suspended before it happens to you. Costs per segment are on SMS and call pricing.

For the short version, see why is my HighLevel SMS not sending and can HighLevel send text messages. Not on the platform yet? The GoHighLevel 30 day trial through Michael's link lets you set this up and test it before the first invoice. For an honest look at strengths and limits, read the HighLevel review.

Help & Support
Opens from the question mark at the top right of the agency view
Relationship Number0 000 000
1
Support AccessLets support look inside your account for a set time
3
Quick support actions
Start Chat
5
Before you contact supportHave these ready
1
Agency Relationship NumberTop of Help and Support, with a copy button
2
Location ID of the subaccountSettings, Business Profile, or the URL after /location/
3
Support Access turned onAgency Settings, Company, Advanced Settings. It expires on the date you pick
4
Screenshots and the exact errorWhat you did, what you expected, what happened
5
Pick a channelAI Support Chat, Agent Chat, a Zoom call, or a ticket by email
Agency Admins and Agency Users onlyBilling or login: +1 (888) 732 4197
Michael Reimer, Founder of CRM Pros
Michael's takeFounder of CRM Pros · HighLevel Commander

The error code is a map. Follow it before you change anything else.

Questions

Common questions.

Why is my SMS not delivered?

SMS messages in HighLevel usually fail because the number is not on an approved A2P campaign (error 30034), the message was filtered by the carrier (30007), the number is invalid (21211) or the contact opted out (21610), so open the failed message, read the code and fix that cause first.

How do I prevent it?

Finish A2P registration before any texting, use branded links, text only consenting contacts and watch error and opt out rates after each campaign.

When should I contact HighLevel support?

Contact support once you have checked every cause on this page and it still fails, or when the fix sits on HighLevel's side. If messages fail with an approved campaign, linked numbers and clean content, send support the sending number, the error code, the time, the exact message text and two or three example contacts.

What does error 30007 mean in HighLevel?

Error 30007 means the carrier filtered the message. Fix consent, identify the business in the message, add opt out wording and replace public link shorteners with branded links.

What does error 30034 mean in HighLevel?

Error 30034 means the number is not on an approved A2P campaign. Link the number to the approved campaign in the Trust Center.

Should I resend a text that failed?

Not until you have fixed the cause. A message that was filtered once will be filtered again, and a contact who opted out must not be messaged.

Next step

See it in your own account. Thirty days, every feature.

Start a 30 day trial through Michael's link, build the first system and test it before the first invoice. Usage fees for phone, SMS, email and AI can apply during the trial.

HighLevel has three plans at a flat monthly price, each with unlimited users and contacts. See what each one includes and what it costs.

Compare the PlansStarter, Unlimited and Founder
⌃

Site preview

Explore the next page

This destination is reserved in the page inventory and is not built yet.